Changes to TunnelIt between r10 and r11
'''Ethernet tunnels with a netcat-like tool'''
'''Security Note:''' No authentication of any type is performed, it is assumed that you take care of this at lower layers (firewall, physical access, etc). This tool is intentionally simple.
(blank line)
How to use it:
* Host A (listener):
** `hostA# tunnelit-p2p -l`
** `hostA# ifconfig tap0 10.72.51.1 netmask 255.255.255.0 broadcast 10.72.51.255`
* Host B (connector):
** `hostB# tunnelit-p2p -H hostA`
** `hostB# ifconfig tap0 10.72.51.2 netmask 255.255.255.0 broadcast 10.72.51.255`
Other options:
Usage: tunnelit-p2p [-VFhluo] [-p port] [-H host] [-d devname] [-f tunpath]
-V Print version and exit
-F Run in foreground (default is to background)
-h Print this help and exit
-l Listen (default is connect)
-u UDP mode --> -u UDP mode (implies "-o")
-o Only allow one client to connect at a time.
-H <host> Connect to host, required if "-l" not specified
-d <devname> TUN/TAP device name (i.e., "tap0")
-f <tunpath> Path to kernel TUN interface (i.e., "/dev/net/tun")
(blank line)
'''Security Note:''' No authentication of any type is performed, it is assumed that you take care of this at lower layers (firewall, physical access, etc). This tool is intentionally simple.
(blank line)
----
Download:
* http://www.rkeene.org/devel/tunnelit-0.0.1.1497.tar.gz
Screenshots:
(blank line)
[http://www.rkeene.org/projects/info/resources/projects/tunnelit/tunnelit-p2p-1.png]
Only in r10
Only in r11 --> Modified slightly between r10 and r11