Changes to TunnelIt between r12 and r17
'''Ethernet tunnels with a netcat-like tool'''
'''Security Note:''' No authentication of any type is performed, it is assumed that you take care of this at lower layers (firewall, physical access, etc). This tool is intentionally simple.
How to use it:
* Host A (listener):
** `hostA# tunnelit-p2p -l`
** `hostA# ifconfig tap0 10.72.51.1 netmask 255.255.255.0 broadcast 10.72.51.255`
* Host B (connector):
** `hostB# tunnelit-p2p -H hostA`
** `hostB# ifconfig tap0 10.72.51.2 netmask 255.255.255.0 broadcast 10.72.51.255`
Other options:
Usage: tunnelit-p2p [-VFhluo] [-p port] [-H host] [-d devname] [-f tunpath]
[-t keepalive]
-V Print version and exit --> -V Print version and exit
-F Run in foreground (default is to background) --> -F Run in foreground (default is to background)
-h Print this help and exit --> -h Print this help and exit
-l Listen (default is connect) --> -l Listen (default is connect)
-u UDP mode (implies "-o") --> -u UDP mode (implies "-o")
-o Only allow one client to connect at a time. --> -o Only allow one client to connect at a time.
-H <host> Connect to host, required if "-l" not specified --> -H <host> Connect to host, required if "-l" not specified
-d <devname> TUN/TAP device name (i.e., "tap0") --> -d <devname> TUN/TAP device name (i.e., "tap0")
-f <tunpath> Path to kernel TUN interface (i.e., "/dev/net/tun") --> -f <tunpath> Path to kernel TUN interface (i.e., "/dev/net/tun")
-t <keepalive> Specify how frequently to send keepalive packets, in
seconds (default: 900)
(blank line)
----
Download:
* http://www.rkeene.org/devel/tunnelit-0.0.1.1497.tar.gz --> * http://www.rkeene.org/devel/tunnelit-0.0.1.1514.tar.gz
----
Screenshots:
[http://www.rkeene.org/projects/info/resources/projects/tunnelit/tunnelit-p2p-1.png]
Only in r12
Only in r17 --> Modified slightly between r12 and r17